Knowledge
Home > Knowledge > Content
The structure, principle and use of Compression Moulding Hydraulic Presses
- Nov 23, 2018 -

From the structural point of view, the compression molding machine is mainly composed of a fixed pressure plate, a movable pressure plate, a fixed mold supported by the fixed pressure plate, a movable mold supported by the movable pressure plate, an opening and closing device, a screw shaft connected by a movable pressure plate, and the like. .

 

The main working principle of the compression molding machine can be summarized as follows: after the device is started up, the opening and closing device rotates the screw shaft to bring the movable mold closer to or away from the fixed mold, thereby opening and closing the mold. The fixed mold can be removed from the fixed platen in a direction intersecting the opening and closing direction of the movable mold. This keeps the molds parallel and precisely grips the machine of the workpiece, which in turn helps to improve the quality of the molded article while also improving productivity.

 

The compression molding machine has the advantages of convenient installation, simple wiring, less daily maintenance work, stability and reliability. At present, it is mainly used to complete roll film and vacuum of polyvinyl chloride (PVC), polystyrene (PS), polypropylene (PP), etc. Blister and plastic compression molding to manufacture a variety of products.http://www.meilimachine.com/