Home > Knowledge > Content
Structural design and safety protection of SMC hydraulic press
- Jan 30, 2019 -

SMC hydraulic press is mainly used for the pressing of thermosetting plastic products. It has independent power mechanism and electrical system, and adopts button centralized control to realize two adjustment modes: semi-automatic operation. The working pressure and stroke range of the machine can be adjusted according to the needs of the process, and the two processes of constant pressure and fixed-length forming can be completed. The process of constant pressure forming has pressure holding, delay and automatic returning action after pressing.


SMC hydraulic press This machine is equipped with exhaust and heating functions. It is operated by two-hand button. When the working mode on the mobile console is semi-automatic, both hands must press the “automatic work” button at the same time, within 0.5S. In order to start the automatic work.


The SMC hydraulic press has an emergency stop button. When the machine is abnormal, press the emergency stop button to stop the press. At the same time, there is overload protection. The hydraulic system is equipped with a hydraulic safety valve to ensure that the press will not be overloaded. The control has upper and lower limit travel switches to ensure that the slider does not overtravel. The SMC hydraulic press is equipped with a safety protection grating with a protection height of more than 500 mm.